Inhalt des Dokuments
zur Navigation
Veröffentlichungen Univ.-Prof. em. Dr.-Ing. J. Lindner
226. Lindner, J., Kuhlmann, U., Just, A.: Verification of Flexural Buckling According to Eurocode 3 Part 1-1 using bow imperfections. Steel Construction, 2016, No. 4, pp. 349 – 362 (Abstract/Inhalt)
225. Lindner, J., Just, A., Kuhlmann, U.: Bow imperfections for flexural buckling according to Eurocode 3 part 1-1. Proceedings to SDDS 2016: International colloquium Stability and Ductility of Steel Structures. Timisoara, 2016, pp. 525-532 (Abstract/Inhalt)
224. Snijder, B., Lindner, J.: Technical committee TC8 – STRUCTURAL STABILITY. ECCS, Brussels, June 2015
(Abstract/Inhalt)
223. Kuhlmann, U., Feldmann, M., Lindner, J., Müller, C., Stroetmann, R. : Eurocode 3, Bemessung und Konstruktion von Stahlbauten. Band 1: Allgemeine Regeln und Hochbau. DIN EN 1993-1-1 mit Nationalem Anhang, Kommentar und Beispiele. Ernst & Sohn, Beuth, Berlin 2014. (Abstract/Inhalt)
222. Kathage, K., Lindner, J., Misiek, Th., Schilling, S. : A proposal to adjust the design approach for the diaphragm action of shear panels according to Schardt and Strehl to European regulations. Steel Construction 6(2013), No. 2, S. 107-116, 7(2014), No.4, S.281. (Abstract/Inhalt)
221. Lindner, J. : Drehbettungsbeiwerte KJ für die Ermittlung der Mindeststeifigkeit nach DIN EN 1993-1-1 bei Ausnutzung der elastischen Querschnittstragfähigkeit. S. 125-131, Festschrift Hanswille, Wuppertal 2011. (Abstract/Inhalt)
220. Seidel, F., Lindner, J. : Aussteifung von biegedrillknickgefährdeten Biegeträgern durch zweiseitig gelagerte Trapezprofile. Stahlbau 80(2011), S. 832-838. (Abstract/Inhalt)
219. Lindner, J. : Biegedrillknicken von Stabtragwerken unter Berücksichtigung baupraktischer Lagerungsbedingungen. Dresdener Stahlbaufachtagung 2011, Dresden 2011. (Abstract/Inhalt)
218. Lindner, J. : Tragfähigkeitssteigerung von Biegeträgern durch Trapezprofile – Ein Überblick zu Drehbettung und Scheibentragverhalten mit Beispielen nach DIN 18800 und EC3. S. 6-1 – 6-29, Tagungsband 33. Stahlbauseminar 2011, Bauakademie Biberach, Wissenschaft und Praxis Band 163, 2011. (Abstract/Inhalt)
217. Feldmann, M., Lindner, J., Pope, R., Bijlaard, F., Stark, J.W.B., Möller, F., Sedlacek, G.: Effects of imperfections of steel columns with contact splices on the design. JRC, first edition, Sept. 2010. (Abstract/Inhalt)
216. Stroetmann, R., Lindner, J. : Knicknachweise nach DIN EN 1993-1-1. Stahlbau 79 (2010), S. 793-808 (Abstract/Inhalt)
215. Lindner, J., Seidel, F. : Shear behaviour of trapezoidal sheeting without shear panel construction. Proceedings SDDS´Rio 2010 : International colloquium Stability and ductility of steel structures, Rio de Janeiro, pp. 1077-1084. (Abstract/Inhalt)
214. Heyde, S., Lindner, J.: Historische Stützen aus Grauguss – Tragsicherheitsnachweise und Ertüchtigung. Stahlbau 78, Heft 11, 2009.(Abstract/Inhalt)
213. Lindner, J., Heyde, S.: Schlanke Stabtragwerke. in: Stahlbau-Kalender 2009, S. 277-375, Verlag Ernst & Sohn, Berlin 2009.
212. Lechner, A., Greiner, R., Lindner, J.: Portal frame with complex boundary conditionsth European conference on steel and composite structures, 3th - 5th September 2008 Graz, pp. 759-764, ECCS Brüssel 2008 – comparison of general method with traditional methods acc. Eurocode 3. Proceedings 5
211. Heyde, S., Lindner, J.: Investigations concerning the load carrying capacity of historic grey cast-iron columns. Proceedings 5th European conference on steel and composite structures, 3th -5th September 2008 Graz, pp. 1545-1550, ECCS Brüssel 2008
210. Lindner, J.: Zur Aussteifung von Biegeträgern durch Drehbettung und Schubsteifigkeit. Stahlbau 77(2008).
209. Lindner,J.: Old and new solutions for contact splices in columns. Special Issue ofJournal of constructional steel research, Elsevier, London, 2008.
208. Gläßer, K., Lindner, J.: Ermüdungsprobleme dünnwandiger kaltgeformter Bauteile. Stahlbau 76(2007), S. 887-897. (Abstract/Inhalt)
207. Lindner, J.: Zur Frage der Mindeststeifigkeiten angrenzender Bauteile beim Biegedrillknicken von Biegeträgern. In : Festschrift Rolf Kindmann, S. 127-145, Shaker Verlag, Aachen, 2007. (Abstract/Inhalt)
206. Lindner, J. : Kontaktstöße in Stützen, die direkt aufeinander stehen. Bauingenieur 82(2007), H. 3, S. 109-114. (Abstract/Inhalt)
205. Boissonnade, N., Greiner, R., Jaspart, J.P., Lindner, J.: Rules for member stability in EN 1993-1-1, background documentation and design guidelines. ECCS/EKS publ. no. 119, Brüssel, 2006. (Abstract/Inhalt)
204. Lindner, J.: Lateral torsional buckling of steel beams and rectangular glass beams consisting of single panes - a comparison. Intern. Conference in metal structures, proceedings pp. 199-205, Poiana Brasov, Romania, Sept. 2006. (Abstract/Inhalt)
203. Lindner, J.: Contact splices in columns. SDSS 2006 Intern. Colloquium on stability and ductility of steel structures., Proceedings pp. 223-232, Lisbon, Sept. 2006. (Abstract/Inhalt)
202. Lindner, J., Holberndt, T. : Zum Nachweis von stabilitätsgefährdeten Glasträgern unter Biegebeanspruchung. Stahlbau 75(2006), S. 488-498. (Abstract/Inhalt)
201. Lindner, J., Seidel, F.: Stabilisierung von Biegeträgern durch Trapezprofile ohne Schubfeldausbildung. Schriftenreihe 25. Steinfurter Stahlbauseminar, Mai 2006, FH Münster. (Abstract/Inhalt)
200. Greiner, R., Lindner, J.: Interaction formulae for members subjected to bending and axial compression in EUROCODE 3 ? the method 2 approach. Journal of Constructional steel research 62(2006), S. 757-770. (Abstract/Inhalt)
199. Lindner, J., Holberndt, T.: Neue Erkenntnisse zur Festigkeit von Glas unter
doppelter Biegung. Stahlbau 75(2006), S. 365-370. (Abstract/Inhalt)
198. Nather, F., Lindner, J., Hertle, R.: Handbuch des Gerüstbaus, Verfahrenstechnik im Ingenieurbau. Verlag Ernst & Sohn, Berlin, 2005. (Abstract/Inhalt)
197. mit Dipl.-Ing. T. Glitsch "Simplified design of crane girders with open cross sections subjected to biaxial bending and torsion". Advances in steel structures (Shanghai June 2005), Proceedings pp. 95-104, Elsevier, London, 2005. (Abstract/Inhalt)
196. mit Dipl.-Ing T. Glitsch (Inhalt/Abstract) "Vereinfachter Nachweis für I- und U-Träger - beansprucht durch doppelte Biegung und Torsion" Stahlbau 73(2004), S. 704-715. (Abstract/Inhalt)
195. "Extension of interaction formulae level 1 for open cross sections to biaxial bending and torsion" (Abstract) Proceeding CIMS '04, Fourth Intern. Conference on coupled instabilities in metal structures, pp. 545-554, Rom Italy, 2004. (Abstract/Inhalt)
194. mit Dipl.-Ing. K. Gläßer"Fatigue behaviour of thin-walled cold formed steel profiles" Proceedings Intern. Conference May 2004 "Recent Advances and Trends in Structural Design", Editura Orizonturi Universitare, pp.71-81, Timisoara/Romania 2004 (Abstract/Inhalt)
193. mit Dipl.-Ing. T. Holberndt "Stabilitätsprobleme bei Glaskonstruktionen" Schriftenreihe 23. Steinfurter Stahlbauseminar, Mai 2004, FH Münster. (Abstract/Inhalt)
192. mit Dipl.-Ing. S. Heyde "Schlanke Stabtragwerke" in Stahlbau-Kalender 2004, S. 373-448, Verlag Ernst & Sohn, Berlin 2004 (Abstract/Inhalt)
191. mit Dr.-Ing.A. Rusch "Application of Level 1 Interaction Formulae to Class 4 Sections" Thin-walled-structures, 42 (2004), pp. 279-293, Elsevier. (Abstract/Inhalt)
190. mit Dipl.-Ing. T. Glitsch, Dipl.-Ing. S. Heyde "Consideration of initial imperfections for members subjected to axial compression and bending" Proceedings of the Intern. Confer. on Advances in Structures (ASSCCA 03), Sydney, Australia, 22-25 June 2003, pp. 221-227, Balkema publ. Lisse. (Abstract/Inhalt)
189. "Design of beams and beam columns", Progress in Structural Engineerings and Materials, Wiley,Vol. 5 No1, January-March 2003, 5(2003), pp 38-47.
188. mit O. Prof. Dr. techn. R. Greiner "Die neuen Regelungen in der europäischen Norm EN 1993-1-1 für Stäbe unter Druck und Biegung". Stahlbau 72 (2003), Heft 3, S. 157-172. (Abstract/Inhalt)
187. "Zur Tragfähigkeit von Kontaktstößen" Dokumentation 657, Vortragsreihe I, Deutscher Stahlbautag 2002. Bauen mit Stahl, Düsseldorf 2002, S. 12-17.
186. mit Dipl.-Ing. T. Holberndt "Lateral torsional buckling capacity of beams supported at the lower flange only" Proceedings Intern. Colloquium on stability and ductility of steel structures, Budapest 2002, Akademiai Kiado Budapest, pp. 47-56. (Abstract/Inhalt)
185. mit Dipl.-Ing. M. Wilke, Dipl.-Ing. S. Heyde, Dr.-Ing. K. Brandes "Zur Tragfähigkeit von Stützen aus Gußeisen" Schriftenreihe 21. Steinfurter Stahlbauseminar, Juni 2002, FH Münster. (Abstract/Inhalt)
184. mit Dipl.-Ing. Budassis "Lateral Torsional Buckling of Partially Encased Composite Beams without Concrete Slab" . New York 2002. (Abstract/Inhalt)
183. mit Dr.-Ing. A. Rusch "Überprüfung der grenz (b/t)-Werte für das Verfahren Elastisch-Plastisch" , Stahlbau 70 (2001), S. 857-868. (Abstract/Inhalt)
182. mit Dr.-Ing. A. Rusch "Tragfähigkeit von beulgefährdeten Querschnittselementen unter Berücksichtigung von Imperfektionen" , Stahlbau 70 (2001), S. 765-774. (Inhalt/Abstract)
181. "Drehbettungswerte für Holzpfetten" , Festschrift Greiner, S.231-239, TU Graz, Institut für Stahlbau, 2001 (Inhalt/Abstract)
180. mit Dr.-Ing. A. Rusch "Remarks to the Direct Strength Method" , Thin-walled Structures, Vol. 39, No. 9, Sept 2001, pp. 807-820, Elsevier UK (Inhalt/Abstract)
179. mit Dipl.-Ing. M. Gehlhaar "Zum Tragverhalten von biegedrillknickgefährdeten Biegeträgern, die nur am Untergurt gelagert sind" , Festschrift Valtinat, S. 211-219, TU Hamburg-Harburg, 2001 (Inhalt/Abstract)
178. mit Dr.-Ing. A. Rusch "Zur Anwendung von Glas als druckbeanspruchtes Bauteil" ,Festschrift Albrecht, Berichte aus dem Konstr. Ingenieurbau, TU München, 5/2001, S. M1-M10.
177. mit Dipl.-Ing. G. Breitschaft, Dipl.-Ing. J. Thaten "Die Seilkraftmessungen bei der Errichtung des Forumdaches beim Sony Center am Potsdamer Platz in Berlin" , Festschrift Sander, Berlin 2001.(Inhalt/Abstract)
176. mit Dr.-Ing. A. Rusch "New European Design Concepts for Beam Columns Subjected to Compression and Bending" , Advances in Structural Engineering, Vol. 4 No. 1, 2001, Multi-Science Publ. Co., UK, pp. 29-41.
175. mit Dr.-Ing. A. Rusch "Lateral torsional buckling of thin-walled I-sections" , Proceedings Nordic Steel Conference, Helsinki, 2001, pp. 713-720.
174. mit Dr.-Ing. A. Rusch, Dipl.-Ing. H. Aßmann "Tragfähigkeit von beulgefährdeten I-Profilen bei Biegung um die y-Achse", Stahlbau 70(2001), S. 329-340. (Inhalt/Abstract)
173. mit Dipl.-Ing. N. Budassis "Biegedrillknicken von kammerbetonierten Verbundträgern ohne Betongurt", Stahlbau 70 (2001), S. 126-133. (Inhalt/Abstract)
172. mit Dipl.-Ing. A. Rusch "Anwendung der Fließlinientheorie auf dreiseitig gelagerte Platten", Stahlbau 70(2001), S. 38-51. (Inhalt/Abstract)
171. "Wechselwirkung zwischen Konstruktion und Berechnung beim Nachweis des Biegedrillknickens", Dokumentation 654, Neues aus Forschung und Entwicklung, Bauen mit Stahl, Düsseldorf, 2000, S. 10-14.
170. mit Dipl.-Ing. A. Rusch "Shift of Effective controid of centrally loaded thin-walled-I-sections",Proceedings CIMS 2000, Imperial College Press London, 2000, S. 189-196.
169. mit Dipl.-Ing. N. Budassis "Zur Durchbiegung von kammerbetonierten Verbundträgern ohne Betonplatte", Festschrift Bode, S. 175-185, Kaiserslautern, 2000.
168. "Stahlbauten und Glaskonstruktionen beim Sony Center in Berlin "Schriftenreihe 19. Steinfurter Stahlbau-Seminar, Mai 2000, FH Münster.
167. mit Dipl.-Ing. N. Budassis "Lateral Torsional Buckling of Partially Encased Composite Beams without Concrete Slab", Conference Proceedings Composite Construction IV, Banff, Alberta, Canada, 2000.
166. "Sony Center am Potsdamer Platz - Ausgewählte Aspekte der Tragwerksplanung", Schriftenreihe Statik und Dynamik, H. 1/2000, S. 7.1-7.15, BTU Cottbus, 2000.
165. "Stability of Structural Members",Journal of Constructional Steel Research 55(2000), pp 29-44, Elsevier Publisher, London.
164. mit Dipl.-Ing. M. Schulte; Dipl.-Ing. G. Breitschaft "Die Membran des Forumdachs im Sony Center in Berlin", Bauen mit Textilien 2(1999), H. 4, S. 10-17. (Inhalt/Abstract)
163. mit Dipl.-Ing. R. Krohmer; Dipl.-Ing. M. Breidert; Dipl.-Ing. R. Beinlich; Dipl.-Ing. C. Skeggs; Dipl.-Ing. T. Krug "Das Gebäude B1 - Filmhaus und Deutsche Mediathek - im Sony Center" , Stahlbau 68(1999), S. 1017-1021. (Inhalt/Abstract)
162. mit Dipl.-Ing. A. Rusch; Prof. Dipl.-Ing. G. Habermann; Dipl.-Ing. M. Breidert; Dipl.-Ing. I. Baarandiaran "Das Haus B2 des Sony Centers am Potsdamer Platz", Stahlbau 68(1999), S. 1007-1016. (Inhalt/Abstract)
161. mit Dipl.-Ing. E. Franke; Dipl.-Ing. R. Beinlich; Dipl.-Ing. J. Sischka; Dipl.-Ing. F. Sieber; Dipl.-Ing. F. Heyder "Berliner Brückenschlag - Die Überbauung des alten Hotels Esplanade im Sony Center", Stahlbau 68(1999), S. 995-1006. (Inhalt/Abstract)
160. mit Dipl.-Ing. M. Schulte; Dipl.-Ing. J. Sischka; Dipl.-Ing. G. Breitschaft; BSC R. Clark; Dipl.-Ing. E. Handel; Dipl.-Ing. G. Zenker "Das Forumdach des Sony Centers am Potsdamer Platz in Berlin", Stahlbau 68(1999), S. 975-994. (Inhalt/Abstract)
159. "Der Prüfingenieur als Partner im Baugeschehen", Stahlbau 68(1999), S. 957-958.
158. "Traglastversuche an Kontaktstößen mit Kopfplatten" Stahlbau 68(1999) ,S. 929-934. (Inhalt/Abstract)
157. mit Dipl.-Ing. G. Breitschaft und Dipl.-Ing. F. Heyder "Zur Tragfähigkeit der Stegbleche der Dresdener Flügelwegbrücke", Stahlbau 68(1999), S. 800-805. (Inhalt/Abstract)
156. mit Dipl.-Ing. A. Rusch "New European Design Concepts for Beam Columns subjected to Compression and Bending" Int. Conference, Kunming/China, Okt. 1999, pp. 344 - 351.
155. mit Dipl.-Ing. A. Rusch "Tragfähigkeit von beulgefährdeten I-Profilen bei Biegung um die z-Achse",Stahlbau 68(1999), S. 457-467. (Inhalt/Abstract)
154. mit Dipl.-Ing. A. Rusch "Influence of Local Buckling of Flanges on the Ultimate Load of I-Sections". The 6. Int. Colloquium on Stability and Ductility of Steel Structures, SDSS '99, Timisoara/Rumänien 1999, pp. 143 - 150.
153. mit Dipl.-Ing. A. Rusch "Load Carrying Capacity of Thin-Walled Short Columns", Light-Weight Steel and Aluminium Structures, Proceedings of ICSAS '99, Espoo, Finland, Elsevier 1999, pp. 155-162 .
152. "Contact Splices in Compression Members" Nordic Steel Conference 1998, Proceedings, Vol I, pp. 167-176.
151. mit Prof. Dr-Ing. G. Hanswille, Dipl.-Ing. D. Münch "Zum Biegedrillknicken von Verbundträgern" Stahlbau 67(1998), S. 525 - 535.
150. mit Dr.-Ing. R. Bergmann "Zur Bemessung von Verbundstützen nach DIN 18 800 Teil 5 "Stahlbau 67(1998), S. 536-546.
149. "Stabilitätsnachweise für Stäbe im Stahlbau ? Konzepte und Grundlagen"
Friedrich u. Lochner: Seminar Biegedrillknicknachweise in der Baupraxis nach DIN 18800 T2 und BT II. Herrsching, Juni 1998.
148. Laudatio für Prof. Dr. E. Cziesielski in: Ingenieur-Hochbau, Berichte aus Forschung und Praxis, Festschrift zum 60. Geburtstag von Prof. Dr. Erich Cziesielski, Werner Verlag, 1998, S. 1-5.
147. mit Prof. Dr.-Ing. J. Scheer und Prof. Dr.-Ing. H. Schmidt "Stahlbauten, Erläuterungen zu DIN 18 800 Teil 1 bis Teil 4 Berlin, Beuth und Ernst u. Sohn, 1993, 3. Aufl. 1998.
146. "Rückwirkungen der konstruktiven Gestaltung auf die Tragsicherheitsnachweise des Biegedrillknickens "Wissenschaft und Praxis Band 89, 1998, FH Biberach, S.1-37.
145. "Lateral torsional buckling of composite beams" in: Proceedings of the second world conference on constructional steel design, San Sebastian 1998.
144. "Restraint of beams by trapezoidally sheeting using different types of connection" in: Stability and Ductility of Steel Structures, pp. 27-36, Elsevier Publ., London 1998.
143. "Stabilitätsnachweise nach geltendem Regelwerk" in: Jahrbuch Schweißtechnik '98, S. 203-212, DVS-Verlag, Düsseldorf 1998.
142. "Zur Bemessung von Verbundstützen nach DIN 18 800 Teil 5" Veröffentl. zum 16. Stahlbau-Seminar Steinfurt, 1997, S. 1-16.
141. "Solutions for problems of lateral torsional buckling of composite beams".
Proceedings Annual meeting Structural Stability Research Council, Lehigh Univ. Bethlehem, Pa, Lehigh/New York 1997, pp. 207-218.
140. mit Aschinger, R. "Zu Besonderheiten bei Trapezstegträgern"
Stahlbau 66 (1997), S. 136-142. (Inhalt/Abstract)
139. "Influence of the type of connection on the torsional restraint coefficient".
Proceedings of the 5th intern. Colloquium on Stability and Ductility of steel structures, Nagoya 1997, pp. 483-490.
138. "Design of steel beams and beam columns" Engin. Structures, Vol. 19. No. 5, 1997, pp. 378-384.
137. "Influence of constructional details on the load carrying capacity of beams"
Engin. Structures, Vol. 18, No. 10, 1996, pp. 752-758.
136. mit Dr.-Ing. T. S. Shin "Interaction between flexual buckling and plate buckling on the web crippling capacity of trapezoidally sheeting" , 2. Int. Conf. on Coupled Instabilities in Metal Structures, Lüttich 1996, pp. 309-316.
135. mit Dr.-Ing. F. Groeschel "Drehbettungswerte für die Profilblechbefestigung mit Setzbolzen bei unterschiedlich großen Auflasten"Stahlbau 65 (1996), S. 218-224. (Inhalt/Abstract)
134. mit Dr.-Ing. T. S. Shin "Zum Krüppeln von Trapezprofilen unter örtlich konzentrierten Lasten" Stahlbau 65 (1996), S. 137-142. (Inhalt/Abstract)
133. mit Dr.-Ing. B. Huang "Beulwerte für trapezförmig profilierte Bleche unter Schubbeanspruchung" Stahlbau 64 (1995), S. 370-374. (Inhalt/Abstract)
132. "Influence of constructional detailing on the lateral torsional buckling capacity of beam columns", Proceedings of the Intern. Conference on Structural Stability and Design, Sydney/Australia, 1995, Balkema Rotterdam, pp. 61-66.
131. "Ersatzimperfektionen für Rohre" Stahlbau 64 (1995), S. 211-214, 65 (1996), S. 32.
130. "Change of lateral torsional buckling capacity of beam columns by constructional detailing", Intern. Colloquium "Stability of Steel Structures", Budapest 1995 Preliminary Report Volume I, S I/141-I/148.
129. "Design of Steel Beams and Beam Columns" Proceedings of the Intern. Conferencee on Stability of Structures (ICSS-95) 1995, India, pp. 103-116.
128. "Equivalent initial bow imperfections for hollow sections" Tubular Structures VI, Proceedings 6th Intern. Symposium on Tubular Structrures Melbourne/Australia, 1994, Balkema Rotterdam, pp. 159-162.
127. "General Intent and a Selection of Rules of DIN 18 800 as One of the Modern Codes in the World" 5th Intern. Conference on Steel Structures, 1994, Indonesia, CI-Premier PTE Ltd., Singapore 0923, pp. 169-175.
126. mit Dipl.-Ing. R. Aschinger "Load-Carrying Capacity of Cold-Formed Beams Subjected to Overall Lateral-Torsional Buckling and Local Plate Buckling" J. Construct. Steel Research, 31 (1994), pp. 267-287.
125. "Ein Vorschlag für einheitliche vereinfachte Tragsicherheitsnachweise von Stahlstützen und Verbundstützen" Stahlbau 63 (1994), S. 290-294, 64 (1995), S.252.
124. mit Dr.-Ing. B. Huang "Progress in the Analysis of Beams with Trapezoidally Corrugated Webs" The 17th Czech and Slovak Intern. Conference on Steel Structures and Bridges, Bratislava, 1994, S. I/157-I/162.(Inhalt/Abstract)
123. "Influence of Constructional Details on the Load Carrying Capacity of Beams"
Proceedings 1994 SSRC 50th Anniversary Conference, 1994, Lehigh University Bethlehem, Pa., S. 65-77.
122. "Die Qualitätssicherung am Bau aus der Sicht eines Prüfingenieurs für Baustatik" in: Der Prüfingenieur, September 1993, S. 43-58, Sept. 94, S. 8.
121. mit Prof. Dr.-Ing. D. Bamm "Baustatik der Flächentragwerke" in: Stahlbau Handbuch, Band 1 Teil A, 3. Aufl. ,Stahlbau-Verlagsgesellschaft mbH, Köln, 1993, S. 251-286.
120. "Biegedrillknicken" in: Stahlbau Handbuch, Band 1 Teil A, 3. Aufl. ,Stahlbau-Verlagsgesellschaft mbH, Köln, 1993, S. 669-683.
119. "Analysis of steel columns, beam-columns and beams in the light of Eurocode 3 and new research results" Proceedings of the Intern. Advanced School, "Eurocodes 3 and 4 in the light of other design rules and new research results", Techn. Univ. Budapest, Dec. 1993, pp. 37-79
118. mit Dr. Y.-L. Guo "Analysis of elastic-plastic interaction buckling of stiffened panels by spline strip method" Computer and Structures, Vol. 46, No. 3, pp 529-536, Pergamon Press, 1993.
117. "Bolted Connections to Hollow Sections with Through Bolts" in: Tubular Structures V. Proceedings of the Fifth Intern. Symposium, Nottingham 1993, pp. 133-140.
116. mit Dipl.-Ing. R. Aschinger "Zur Streckgrenzenerhöhung infolge Kaltumformung bei dünnwandigen Kaltprofilen" Stahlbau 62 (1993), S. 170-178.
115. mit Prof. Dr.-Ing. J. Scheer und Prof. Dr.-Ing. H. Schmidt "Stahlbauten, Erläuterungen zu DIN 18 800 Teil 1 bis Teil 4 Berlin, Beuth und Ernst u. Sohn, 1993, 2. Aufl. 1994.
114. Verbundbau in: Hütte Bautechnik Band VI, Konstruktiver Ingenieurbau Bd. 3,
Berlin/Heidelberg, Springer, 1993, Teil G, S. 151-267.
113. Stahlbau in: Hütte Bautechnik Band VI, Konstruktiver Ingenieurbau Bd. 3,
Berlin/Heidelberg, Springer, 1993, Teil G, S. 1-150.
112. "Zum vereinfachten Biegedrillknicknachweis für Biegeträger durch Nachweis des Druckgurtes als Druckstab" Festschrift Vogel, Karlsruhe, 1993, S. 255-263.
111. mit Prof. Dr.-Ing. D. Bamm "Versuche an angesteiften Platten mit schwimmenden Steifen" Stahlbau 62 (1993), S. 103-106.
110. mit Prof. Dr.-Ing. D. Bamm und Dipl.-Ing. W. Müller "Querkraftbeanspruchte geschraubte Anschlüsse an Hohlprofilen" Stahlbau 62 (1993), S. 27-31.
109. "Design Applications for Beams Restrained by Adjacent Members"
Constructional Steel Design: World Developments, Elsevier Applied Science, London/New York, S. 3-11.
108. mit Prof. Dr.-Ing. D. Bamm und Dipl.-Ing. W. Müller "Normalkraftbeanspruchte geschraubte Anschlüsse an Hohlprofilen" Stahlbau 61 (1992), S. 371-376.
107. "Zur Bemessung von Trapezstegträgern" Stahlbau 61 (1992), S. 311-318.
106. mit Dipl.-Ing. R. Aschinger "Ergänzende Auswertungen zur Interaktion zwischen Biegedrillknicken und örtlichem Beulen" Stahlbau 61 (1992), S. 188-191.
105. "Verzweigungslasten für das Biegedrillknicken beim Einfeldträger mit Kragarm und gebundener Drehachse" Stahlbau 61 (1992), S. 157-159.
104. "Erläuterungen zu DIN 18 800 Teil 2" Mitteilungen des Instituts für Bautechnik, 23 (1992) H. 2, S. 50-55, Berlin, 1992.
103. mit Dipl.-Ing. T. Gregull "Zur Traglast von Biegeträgern, die durch gleichzeitiges Auftreten von örtlichem Beulen und Biegedrillknicken versagen".
Stahlbau 61 (1992), S. 9-15.
102. mit Dipl.-Ing. A. Behrens und Dr.-Ing. W. Stucke "Die Kesselhäuser und DeNOx-Anbauten des neuen Kraftwerkes Reuter-West in Berlin Spandau". Stahlbau 60 (1991), S. 353-359.
101. "Load Carrying Capacity of Beams Subjected to Local Plate Buckling and Overall Lateral Torsional Buckling" Proceedings of the Fourth Intern. Colloquium on Structural Stability, Mediterranean Session, pp. 113-122, Istanbul 1991.
100. "Shear Capacitiy of Beams with Trapezoidally Corrugated Webs and Openings". Proceedings of the Fourth Intern. Colloquium on Structural Stability, Mediterranean Session, pp. 103-112, Istanbul 1991.
99. "Shear Capacity of Beams with Trapezoidally Corrugated Webs and Openings".
Proceedings. 1991, Annual Technical Session and Meeting SSRC, pp. 403-410, Chicago.
98. "Lateral Torsional Buckling of Beams with Trapezoidally Corrugated Webs"
Proceedings of the Intern. Colloquium Stability of Steel Structures, pp. 79-82, Budapest 1990.
97. "Ist die Konstruktive Bauüberwachung für die Qualitätssicherung von Bauwerken erforderlich?" Stahlbau 59 (1990), S. 305-310.
96. mit Dipl.-Ing. R. Aschinger "Zur Torsionssteifigkeit von Trapezträgern"
Stahlbau 59 (1990), S. 113-120.
95. mit Dipl.-Ing. K. Schories "Überlegungen zur Dimensionierung von Biegeträgern mit Ausschnitten". 12. Stahlbau-Seminar, Biberach 1990.
94. mit Dipl.-Ing. P. Magnitzke "Standsicherheit von Arbeitsgerüsten mit Verkleidungen". Stahlbau 59 (1990), S. 39-44.
93. Lindner, J., Gregull, T. : Drehbettungswerte für Dachdeckungen mit untergelegter Wärmedämmung. Stahlbau 58 (1989), S. 173-179, 383.
92. Lindner, J. : Specification and Codes in Western Europe. 4th Intern. Colloquium "Code Differences Around the World. pp. 73-82, SSRC New York, 1989.
91. Lindner, J., Gregull, T. : Zur Berechnung von Pfetten aus Kaltprofilen. Stahlbau 58 (1989), S. 87-91.
90. Lindner, J. : To the Load Carrying Capacity of Cold-Formed Purlines. Ninth Intern. Speciality Conference on Cold-Formed-Steel Structures. Missouri-Rolla, Proceedings, pp. 361-370, Rolla 1988.
89. Lindner, J., Habermann, W. : Zur Weiterentwicklung des Beulnachweises für Platten bei mehrachsiger Beanspruchung. Stahlbau 57 (1988), S. 333-339,
Berichtigung: Stahlbau 58 (1989), S. 349-351.
88. Lindner, J., Gietzelt, R., Fehlau, J. : Ein besonderer Sendemast für den SFB.
Stahlbau 57 (1988), S. 289-297.
87. Lindner, J., Fehlau, J. : Plastische Grenzlasten für Träger mit Trapezlasten.
Stahlbau 57 (1988), S. 273-279.
86. Lindner, J. : Influence of Structural Connecting Details on the Load Carrying Capacity of Girders." IVBH 13. Kongreß Helsinki, S. 717-722, Zürich 1988.
85. Lindner, J., Gregull, T. : Zur Randversteifung der Druckgurte von dünnwandigen Biegeträgern. Festschrift Baehre (Der Metallbau im Konstruktiven Ingenieurbau),
TH Karlsruhe, S. 471-483, 1988.
84. Lindner, J., Gietzelt, R. : Kontaktstöße in Druckstäben. Stahlbau 57 (1988), S.39-49, 384.
83. Lindner, J. : Stabilisierung von Biegeträgern durch Drehbettung - eine Klarstellung. Stahlbau 56 (1987), S. 365-373.
82. Lindner, J. , Fehlau, J. : Computational Methods Solving Lateral Torsional Buckling Problems. Proceedings of 2nd International Conference, EPMESC, Guangzhou/China, 1987.
81. Lindner, J., Gregull, T. : Design Rules for Thinwalled Structures Due to DIN 18 800 Part 2. Proceedings of the "International Conference Steel and Aluminium Structures Cardiff 1987", Elsevier Applied Science, London 1987, pp. 541-553.
80. Lindner, J., Habermann, W. : Zur mehrachsigen Beanspruchung beim Plattenbeulen. in: Festschrift Joachim Scheer, TU Braunschweig, 1987, S. 159-183.
79. Lindner, J. : Stabilisierung von Trägern durch Trapezbleche. Stahlbau 56 (1987), S. 9-15.
78. Lindner, J., Fehlau, J., Schulze, G. : Oscillating Stressing of Open-Grid-Flooring. TUB-MIT-Berichte in: Five Years of Research Cooperation in Bridge Design, H. 10/Reports on Cooperative Research, TU Berlin 1986.
77. Lindner, J. : Gitterroste mit Klemmbefestigungen zur Aussteifung von IPE-Trägern. Stahlbau 55 (1986), Heft 9, S. 263-268.
76. Lindner, J. : General Intent and a Selection of Rules for Dimensioning from the new German Stability Code DIN 18 800, Part 2. Proceedings of the second Regional Colloquium "Stability of Steel Structures Hungary", Budapest 1986, pp. I/11-I/17.
75. Lindner, J., Gregull, T. : Torsional Restraint Coefficients of Profiled Sheeting.
Proceedings of the IABSE Colloquium Stockholm Thin-Walled Metal Structures
in: Buildings, Vol. 49, Zürich 1986, S. 161-168.
74. Lindner, J., Stickel, I. : Zur Stabilisierung von I-Trägern durch Gitterroste.
Stahlbau 54 (1985), S. 369-374.
73. Lindner, J., Gietzelt, R. : Zweiachsige Biegung mit Längskraft - Ein ergänzter Bemessungsvorschlag. Stahlbau 54 (1985), S. 265-272.
72. Lindner, J. : Vereinfachungen beim Nachweis des Biegedrillknickens. Sattler-Festschrift, TU-Berlin, 1985, S. 69-86.
71. Lindner, J., Gietzelt, R. : Zur Tragfähigkeit ausgeklinkter Träger (Ergänzungen).
in: Aus Wissenschaft und Praxis, Schriftenreihe der Fachhochschule Biberach,
H. 39, 1985.
70. Lindner, J. : Influence of Parameters of Lateral Bracing on the Load Carrying Capacity of I-Beams. Proceedings of the 1985 Annual Technical Session,pp 201-210, Structural Stability Research Council, April 1985, Cleveland, Ohio.
69. Lindner, J. : Realization of Simple Support by End Plates with Reduced Depth.
Proceedings of the 1985 Annual Technical Session, pp 193-200, Structural Stability Research Council, April 1985, Cleveland, Ohio.
68. Lindner, J., Hamaekers, K. : Zur Tragfähigkeit von Gerüstspindeln. Stahlbau 54 (1985), Heft 8, S. 225-232.
67. Lindner, J. : Stabilität von Stäben aus Stahl nach DIN 18 800 Teil 2.
Berichte von der Prüfingenieur Tagung 1984 in Konstanz, Stuttgart 1985.
66. Lindner, J., Gietzelt, R. : Zur Tragfähigkeit ausgeklinkter Träger. Stahlbau 54 (1985), Heft 2, S. 39-45.
65. Lindner, J. : Stability Rules due to the Draft of DIN 18 800, Part 2 and Draft Eurocode. The Bridge and Foundation Engineering, Nov. 1984, S. 7-13 (in japanisch).
64. Lindner, J. , Gietzelt, R. : Zweiachsige Biegung und Längskraft - Vergleich verschiedener Bemessungskonzepte. Stahlbau 53 (1984), S. 328-333.
63. Lindner, J. : Testing Procedures - Beams Testing. in: Testing Procedures, ECCS-EKS-CECM publication No. 36, Brüssel, 1984, S. 28-35.
62. Lindner, J., Hamaekers, K., Behrens, A. : Traggerüste für die Rauchgaskanäle einer Rauchgasentschwefelungsanlage. Stahlbau 53 (1984), Heft 10, S. 289-294.
61. Lindner, J. : Vergleich verschiedener Nachweise für Druck und Biegung um die starke Achse von I-Profilen. in: Festschrift Roik, Mitteilung 84-3, Ruhr-Universität-Bochum, 1984, S. 225-236.
60. Lindner, J. : Interaktion zwischen den vollplastischen Schnittgrößen N und My bei I-Profilen. Stahlbau 53 (1984), Heft 8, S. 249-250.
59. Lindner, J.: Aufnehmbare Schnittgrößen N + My bei I-Profilen. Stahlbau 53 (1984), S. 217-218.
58. Lindner, J. : Ungewollte Schiefstellungen von Stahlstützen. Schlußbericht zum 12. IVBH Kongreß Vancouver, Zürich, 1984.
57. Lindner, J., Gietzelt, R. : Imperfektionsannahmen für Stützenschiefstellungen.
Stahlbau 53 (1984), Heft 4, S. 97-102.
56. Lindner, J. : Bemessung von Stützen nach dem Entwurf zu DIN 18 800 Teil 2".
Berichte Konferenz "Metallkonstruktionen", Danzig, 1984, Bd. 1, S. 236-244.
55. Lindner, J. , Gietzelt, R. : Stabilisierung von Biegeträgern mit I-Profil durch angeschweißte Kopfplatten. Stahlbau 53 (1984), Heft 3, S. 69-74.
54. Lindner, J., Bamm, D., Voß, R.-P. : Traglastversuche an ausgesteiften Trägerauflagern. Stahlbau 52 (1983), S. 296-300.
53. Lindner, J., Gietzelt, R. : Discussion of interaction equations for members in compression and bending. Final report Stability of metal structures, Paris 16-17 Nov. 1983, S. 45-54.
52. Lindner, J. : Nachweise in bezug auf das Biegedrillknicken nach Eurocode.
in: 75 Jahre DASt, Stahlbau Verlag, Köln, 1983.
51. Lindner, J., Schmidt, J.S., Subramanian, N. : Traglastversuche an Zweifeldträgern mit dünnwandigen C-Profilen. Stahlbau 52 (1983), S. 143-147.
50. Lindner, J. , Gietzelt, R. : Influence of End-Plates on the Ultimate Load of Laterally Unsupported Beams. in: Instability and Plastic Collapse of Steel Structures, Granada, London, 1983. The Michael R. Horne Conference 20. - 22. Sept. 1983.
49. Lindner, J. : Construction and Calculation of Orthotropic Steel Plate Deck Bridges and Composite Bridge Decking. in: Bridge Design in Germany, TU Berlin, 1983.
48. Lindner, J. : Some Considerations in the Design of Cable Stayed Bridges. in: Bridge Design in Germany, TU Berlin, 1983.
47. Lindner, J. : Biegedrillknicken. in: Stahlbau Handbuch, 2. Aufl., Bd. 1, Stahlbau-Verlag Köln (1982),
S. 493-505.
46. Lindner, J., Bamm, D. : Berechnung von orthotropen Platten und Trägerrosten.
in: Stahlbau Handbuch, 2. Aufl., Bd. 1, Stahlbau-Verlag Köln (1982), S. 216-240.
45. Lindner, J., Kurth, W. : Zum Biegedrillknicken von Stützen aus StE 690.Stahlbau 51 (1982), S. 366-372.
44. Lindner, J., Schmidt, J.S. : Biegedrillknicken von I-Trägern unter Berücksichtigung wirklichkeitsnaher Lasteinleitung. Stahlbau 51 (1982), S. 257-263.
43. Lindner, J. : Influence of Realistic Load Introduction to the Load Carrying Capacity of I-Beams. Proceedings of the US-China Symposium, Peking, 1982.
42. Lindner, J., Gietzelt, R., Möll, R., Werling, L. : Zur Konstruktion und Berechnung eines Hochregallagers in Berlin. Der Stahlbau 51 (1982, S. 129-136.
41. Lindner, J., Subramanian, N. : Allowable Stress Provisions of IS: 800-1962.
Journal of the Institution of Engineers (India), vol. 62, Jan. 1982, S. 246-249.
40. Lindner, J. : Laschenverbindungen mit vergrößertem Lochspiel. Der Stahlbau 50 (1981), S. 359-361.
39. Lindner, J. : Kurventafel für einen vereinfachten Beulsicherheitsnachweis.
Der Stahlbau 50 (1981), S. 294-297.
38. Lindner, J., Fröhlich, K.-C. : Statische Berechnungen zu Großversuchen an Fassadengerüsten. Der Stahlbau 50 (1981), S. 142-146.
37. Vogel, U., Lindner, J. : Kommentar zu DIN 18 800, Teil 2 (Gelbdruck) -Stabilitätsfälle im Stahlbau - Knicken von Stäben und Stabwerken. Heft 11/1981 der Berichte aus Forschung und Entwicklung des Deutschen Ausschusses für Stahlbau, Stahlbau-Verlags GmbH, Köln 1981.
36. Lindner, J. : Biegedrillknicken von Voutenträgern und konischen Balken.
Der Bauingenieur 56 (1981), S. 146.
35. Lindner, J. , Gietzelt, R. : Biegedrillknicken - Erläuterungen, Versuche, Beispiele. H. 10/1980 der Berichte aus Forschung und Entwicklung des Deutschen Ausschusses für Stahlbau, Stahlbau-Verlags GmbH, Köln 1980.
34. Lindner, J. : Biegedrillknicken in Theorie, Versuch und Praxis. in: Neues aus Forschung, Entwicklung und Normung, H. 9/1980 der Berichte aus Forschung und Entwicklung des Deutschen Ausschusses für Stahlbau, Stahlbau-Verlags GmbH, Köln 1980.
33. Lindner, J. : Zum Biegedrillknicken im Holzbau. v. Halász - Festschrift, S. 119-130, Verlag W. Ernst & Sohn, Berlin 1980.
32. Lindner, J., Kurth, W. : Drehbettungswerte bei Unterwind. Der Bauingenieur 55 (1980), H. 10, S. 365-369.
31. Lindner, J., Kurth, W. : Zum Einfluß der Eigenspannungen bei querbelasteten Kaltprofilen. Der Stahlbau 49 (1980), S. 297-302.
30. Lindner, J., Roik, K., Stucke, W. : Zum Einfluß von Profilverformungen auf die Mindeststeifigkeit von Drehbettungen. Die Bautechnik 56 (1979), S. 99-104.
29. Lindner, J., Wiechert, G. : Zur Bemessung biegedrillknickgefährdeter Stäbe.
Jungbluth-Festschrift, S. 54-91, TH Darmstadt 1978.
28. Lindner, J. : Steifigkeitsannahmen für die Berechnung von Rüststützen. VDI-Bildungswerk, BW 3879, Düsseldorf 1978.
27. Lindner, J., Kurth, W. : Biegedrillknickversuche an querbelasteten Walzträgern.
Der Bauingenieur 53 (1978), S. 373-377.
26. Lindner, J. : Näherungen für die Europäischen Knickspannungskurven. Die Bautechnik 55 (1978), S. 344-347.
25. Lindner, J. : Tragfähigkeit von Rähmprofilen. VDI-Bildungswerk, BW 3389, Düsseldorf 1978.
24. Lindner, J. : Developments on Lateral Torsional Buckling. "Stability of Structures under static and dynamic Loads". Washington 1977, S. 532-539, ASCI New York.
23. Lindner, J. : General Report on "Lateral Buckling". Final Report of Second International Colloquium on Stability of Steel Structures, Lüttich 1977, S. 103-109, S. 127.
22. Lindner, J., Bamm, D. : Influence of Realistic Yield Stress Distributions on Lateral Torsional Buckling Loads. Preliminary Report of Second Internatioal Colloquium on Stability of Steel Structures, Lüttich 1977, S. 213-216.
21. Lindner, J., Wiechert, G. : Boundary Slenderness for Flexural Torsional Buckling of Uniaxial Loaded I-Columns. Preliminary Report of Second International Colloquium on Stability of Steel Structures, Lüttich 1977, S. 363-372.
20. Lindner, J. : The Ultimate Load of Monosymmetric Sections due to Lateral
Torsional Buckling. Schlußbericht zum 10. IVBH Kongress Tokyo 1976, S. 353-357.
19. Lindner, J. : Contribution to the Problem of Lateral Torsional Buckling of Beams.
Second International Colloquium on Stability of Steel Structures, Preliminary Report zum 10. IVBH Kongreß Tokyo 1976, S. 113-119.
18. Lindner, J., Bos, A.M., Djalaly, H., Fischer, M., Nethercot, D.A. : Laterally Supported and Unsupported Beams. Manual on the Stability of Steel Structures, Paris 1976, S. 127-143.
17. Lindner, J., Bos, A.M., Djalaly, H., Fischer, M., Nethercot, D.A. : Flexural Torsional Buckling. Manual on the Stability of Steel Structures, Paris 1976, S.104-112.
16. Lindner, J. : Stabilität von Rähmträgern. VDI-Berichte Nr. 245, 1975, S. 105-110.
15. Lindner, J. : Traglastkurven für I-Träger, die durch außermittige Querlasten beansprucht werden. Der Stahlbau 43 (1974), H. 10, S. 307-313.
14. Lindner, J. : Der Einfluß von Eigenspannungen auf die Traglast von I-Trägern.
Der Stahlbau 43 (1974), H. 2, S. 39-45, H. 3, S. 86-91.
13. Lindner, J. : Anschlußmomente von Trägern, die zur Kippaussteifung herangezogen werden. Die Bautechnik 50 (1973), H. 10, S. 342-344.
12. Lindner, J. : Theoretical Investigations of Columns under biaxial Loading.
Colloquium of Column Strength, Paris 1972, IABSE Proceedings Volume 23.
11. Roik, K., Lindner, J. : Einfluß der exzentrischen Lage von Wendeln auf die Tragfähigkeit von Kopf-bolzendübeln. Der Bauingenieur 47 (1972), H. 9, S. 344-346.
10. Lindner, J. : Gebundene Kippung beim Einfeldträger mit Kragarm. Der Stahlbau 41 (1972), H. 7,S. 216-218.
9. Roik, K., Lindner, J. : Einführung in die Berechnung nach dem Traglastverfahren.
Stahlbau Verlags GmbH, Köln 1972, Neudruck 1976.
8. Cziesielski, E., Lindner, J. : Hölzerne Knickstäbe. Bauingenieur-Praxis, H. 50 Verlag W. Ernst & Sohn, Berlin 1972.
7. v. Halász, R., Cziesielski, E., Lindner, J., Slomski, W. : Bemessungstabellen für hölzerne Dachkonstruktionen. Verlag W. Ernst & Sohn, Berlin 1972.
6. Lindner, J. : Mindeststeifigkeiten für den Kippsicherheitsnachweis beim Traglastverfahren. Der Bauingenieur 47 (1972), H.7, S. 238-240.
5. Roik, K., Carl, J., Lindner, J. : Biegetorsionsprobleme dünnwandiger gerader Stäbe. Verlag W. Ernst & Sohn, Berlin 1972.
4. Lindner, J. : Näherungsweise Ermittlung der Traglasten von auf Biegung und Torsion beanspruchten I-Trägern. Dissertation Berlin 1970 Die Bautechnik 48 (1971), H. 5, S. 160-170.
3. Roik, K., Lindner, J. : Entwurfshilfen für Hallenrahmen aus IPE-Profilen. Merkblatt 440 der Beratungsstelle für Stahlverwendung, Düsseldorf 1970.
2. Roik, K., Lindner, J. : Standardisierte Hallen aus IPE-Profilen. Der Bauingenieur 45 (1970), H. 1, S. 5-8.
1. Lindner, J. : Näherungsweise Bestimmung der mitwirkenden Plattenbreite bei Normalkraftbeanspruchung. Die Bautechnik 45 (1968), H. 12, S. 403-408.